Look on the My Weather Direct column on the left side of your screen. Do you see Weather Station 1 or Audio Weather Station 1 showing under the Gateway?
If so:
Click on the display station name and select Time Zone and Location to configure it. You registered but need to complete initial display configuration.
Press SAVE to confirm your changes.
Once the forecast icons show on your display (allow 5-15 minutes depending on model), you may proceed to the TX50 outdoor sensor setup page.
If no forecast data appears yet:
Power cycle the Standard Gateway: Unplug the a/c cord from the gateway for 10 seconds. Do not touch the gray gateway button. Plug the a/c cord into the gateway and see if the red light becomes solid red. A solid red light almost always indicates a functioning gateway that is connected to the internet.
Refresh the web page (press F5 on your keyboard or click on the refresh icon in your browser).
Click on Gateway 1 (or the name you gave your gateway) to see the Overview.
Check that the Last Seen date and time are current.
If the Last Seen is not current, see the Gateway Registration Help section.
If the Last Seen is current, complete the Factory Reset Procedure for your Display.